Compatibility#

Waveshare ESP32-S3-LCD-1.47B

ESP-Mosaico V1.2 (ESP32-S31)

Firmware

OpenCarMind 2.5.1, beta 2.5.1b

OpenCarMind EdgeOS 2.1.0

Build target

idf.py set-target esp32s3

idf.py --preview set-target esp32s31

ESP-IDF

v6.1

v6.1

Release download

latest release

OpenCarMind EdgeOS 2.1.0 release

Flashing

desktop app, or idf.py flash

1200-baud door and esptool 5.6.0 or later

Drive storage

SD card

128 MB NAND

Pairing prompt

in the source, off by default (CONFIG_OBD_BLE_PAIR_CONFIRM)

on

Health app and AI services

no

yes, since 2.1.0

Each image is built for one chip. Do not flash the ESP-Mosaico image on an S3. Other ESP32-S3 boards need the pin map in main/board.h edited.

Adapters#

Classic-only adapters will not work on the S3, which has no Classic radio. The ESP-Mosaico build uses the same Bluetooth LE link through NimBLE, so pick a Bluetooth LE adapter for either board. The full table with the service layouts is on Adapters.

Desktop app#

It runs on Windows, macOS and Linux and talks to both boards over the same USB protocol. Its Flash firmware button is for the ESP32-S3 only. Where the app says “SD card”, on the ESP-Mosaico it means the board’s own storage.