Updating the firmware#
With the desktop app#
Install the desktop app of the version you want. It carries the matching firmware image and its own copy of esptool, so you need no other tools.
Connect the board over USB and choose Flash the firmware on the Board page.
The board keeps its Wi-Fi networks and its pairing, because they live in a separate flash partition.
Building it yourself#
You need ESP-IDF v6.1 and Python 3.
. $IDF_PATH/export.sh
idf.py set-target esp32s3
idf.py build
idf.py -p /dev/cu.usbmodemXXXX flash monitor
If you built an earlier version in the same folder, delete sdkconfig first.