A logger and dashboard that thinks on the board#

OpenCarMind reads your car through its OBD-II port, shows the live values on its screen and writes each drive to the SD card as its own session. OBD-II is the standard diagnostic port under the dash of every car sold in the US since 1996.

It reads the car#

The board reads every standard field the car reports (70 are decoded), plus the battery voltage, the VIN, and stored, pending and permanent trouble codes. Each poll cycle adds one row to the log.

It runs AI on the chip#

A small neural network, called the model, looks at the last 5 seconds of driving. It says whether you are stopped, braking, accelerating or cruising. It also estimates brake pressure, engine torque and fuel rate, which the port does not report.

It keeps your data with you#

Your drives are plain CSV, JSON and text files on a card you hold. At home the desktop app imports new drives over the USB cable, or you take the card out.

Note

Open source

The firmware, the desktop app and the on-board models are MIT-licensed at github.com/AlveeeRahman/OpenCarMind.

No data collection

There is no account and no cloud. Wi-Fi is optional and only sets the clock from one time server. It sends nothing else.

Your stats, on your computer

The free desktop app imports drives over the USB cable and charts them on your own computer.

Warning

Which firmware this manual covers.

This manual follows the firmware on the repository’s main branch. That build still reports version 2.5.1, but it is newer than the 2.5.1 release on the Releases page. The 2.5.1 release has no BOOT double-click or automatic connection search and no “Turning off” screen, and a new board starts on CarMind E.V instead of R.E.V.